Riello Hi, Comfort 100, Инструкция по установке и эксплуатации, Страница: 79 / 84

79
Alarm Description Solution
E82
SET
PROG
RESET
ESC
MODE
Communication failure be-
tween the Hi, Comfort T100
and the WiFi Box.
RESET:
SET
PROG
RESET
ESC
MODE
SET
PROG
(*)
(*) do not modify using the
UP and DOWN buttons.
SET
PROG
(**)
(**) if the number 1 shows in-
stead of the message “Adr”,
press the FORWARD button
until “Adr” does show.
− Check the dis-
tance between the
Hi, Comfort T100 and
the WiFi Box (see "2.3
Technical Data" to page
33).
− Remove and then reinsert
the batteries.
− Check that the WiFi Box
is connected to a power
source.
− Check the cou-
pling between the
Hi, Comfort T100 and
the WiFi Box (see "3.14
Linking function" to
page 73).
− Contact the Authorised
Service Centre.
To reset:
− From the HOME screen on
the programmable ther-
mostat Hi, Comfort T100,
press the ESC/MODE but-
ton and hold for 5 sec-
onds until two dashes are
shown on the display.
− Press the ESC/MODE but-
ton a second time and
hold for 5 seconds until
the number (*) at the top
left starts flashing.
− Press the ESC/MODE but-
ton a third time and hold
for 5 seconds until the
message “Adr” (**) is dis-
played.
− Press the SET/PROG button
twice to confirm.
− Remove both batteries for
a few seconds, then put
them back.