Refrigerating circuit
Installer
Product delivery
Preliminary instructions
We suggest to take the equipment out of its packaging only when it
has been placed in position at the installation point.
Carefully remove any adhesive strips positioned on the unit.
Do not dispose of, abandon or leave the potentially hazardous
packaging materials within the reach of children.
Scope of supply
Also supplied:
Installer manual
External probe
Barcode labels
Control panel
Strain relief (size 015ME only)
List of spare parts
The supplied accessories are positioned inside the electrical panel.
Cable gland
Drain discharge pipe
Handling and transportation
The unit must be handled by skilled technicians, appropriately
equipped and with the appropriate tools to manage the unit’s weight in
compliance with the accident prevention regulations.
When handled, the unit must always be kept in a vertical position.
The weight of the equipment is off balance towards the compressor.
If the unit is lifted, use pipes with a diameter and thickness appropriate
for the weight of the unit.
Use all the lifting points shown.
Access to inner parts
- Remove the access panel.
- Loosen the fastening screw.
Electronic expansion valve
LWT sensor
EWT sensor
TR sensor
Distributor
TE sensor
Heat exchanger
TO sensor
TS sensor
TD sensor / TD-Fühler
Silencer
Silencer
Rotary compressor
Fluid receiver
Charge connection
4-way valve
Plate heat exchanger / Plattenwärmetauscher
600
150
150
430
400
363
37
1
2
3
19
