24
USE
1
Display
1
1
Temperature indication
1
To restore operating conditions:
—
set the main switch to “Off”
—
allow 10 minutes
—
reposition the general switch on "on"
—
press
on the remote control
If the climate control system resumes normal operation, it means
that shutdown was due to an erratic condition.
If the fault occurs again, an accurate check of the device compo-
nents is required. Contact
R
Technical Support Service.
fault codes for indoor unit
Code
Description
Remarks
E1
Room probe fault
The unit resets after
problem resolution
E2
Exchanger probe fault
E4
Microprocessor
malfunction
E7
Communication error
between indoor unit and
outdoor unit
E14
Fan motor malfunction
AMK P
faults on unit display
Operating anomalies are signaled with a code from the indoor
unit display. Their intervention secures the appliance and blocks
its operation.
1
Display
1
1
Timer on
2
Temperature indication, alarm code
1
2
To restore operating conditions:
—
set the main switch to “Off”
—
allow 10 minutes
—
reposition the general switch on "on"
—
press
on the remote control
If the climate control system resumes normal operation, it means
that shutdown was due to an erratic condition.
If the fault occurs again, an accurate check of the device compo-
nents is required. Contact
R
Technical Support Service.