20
USE
1
Emergency switch
1
Activation
—
lift the front panel
—
press the emergency switch using a pointed object
Equipment outputs a warning sound and switches on.
Switch-off
—
lift the front panel
—
press the emergency switch using a pointed object
Equipment switches off.
9
The auxiliary switch is an emergency device and must not
be used regularly.
2.6
Temporary shutdown
In order to shut down the unit for periods of brief absences:
press
The unit display turns off.
The horizontal motorised deflector closes.
9
The settings are memorized by the remote control and are
activated each time
is pressed.
9
Turn unit off exclusively through the remote control.
2.7
Stop for an extended period of time
If the device has not been used for an extended period of time,
carry out the following operations:
—
start the device in ventilation mode
—
select the maximum speed
—
let the device run for 6 hours
—
deactivate the unit with the remote control
ON
OFF
—
position the system's main switch in the "OFF" position.
2.8
Maintenance
Routine maintenance is fundamental for keeping the equip-
ment efficient, safe and reliable. It can be performed periodi-
cally by
R
Technical Support Service, whose staff is technical-
ly qualified and can use genuine spare parts, if necessary.
2.9
Cleaning
AMW P - AMW ST
The only necessary cleaning, on the part of the user, are those of
the remote control, of the cover cabinet, of the front grille, of the
mesh filters and the replacement of the purifying filters.
9
All described operations MUST be carried out under the fol-
lowing conditions:
—
cold device
—
device NOT supplied with electric power
—
suitable personal protection equipment
ON
OFF
0
Do not open the access covers and carry out technical or
cleaning activities before disconnecting the unit from the
power grid by positioning the system's main switch in the
"OFF" position.
Cleaning the remote control
—
clean with a soft and dry cloth
Cleaning the housing and front panel
—
wet a sponge or soft cloth with water and soap to wash
—
once cleaning is over dry surfaces with care
9
Do not use water at a temperature that is higher than 40°C,
powder or abrasive detergents, solvents and brushes.
Mesh filter cleaning
Cleaning the mesh filters ensures trouble-free operation of the
climate control system.
