Riello 3755119, Инструкции по установке, использованию и обслуживанию

Страница: 22 / 40

20146119 20
GB
Installation
5.11.3 Electrical diagram
Key (Fig. 17)
AD
Air damper opening motor
C Motor capacitor
CN1 Ionisation probe connector
E Ignition electrode
F Filter
h1 Hour counter (230V - 0.1A max.)
MV Fan motor
PA Air pressure switch
PG Min. gas pressure switch
RS Remote reset connection
SB Lockout light (230V - 0.5A max.)
SM One-stage damper conn.
SO Ionisation probe
TB Burner earth
TL Limit thermostat
TS Safety thermostat
T6A Fuse
V1 Adjustment valve
VS Safety valve
XP6 6 pin plug/socket
XP7 7 pin/plug socket
WARNING

Do not invert the neutral with the phase in the
electrical supply line.

Check that the electrical supply of the burner
corresponds to that shown on the identifica-
tion label and in this manual.

The section of the conductors must be at
least 1mm
2
. (Unless requested otherwise by
local standards and legislation).
WARNING
Check the burner stops by opening the thermo-
stats and check it locks out by opening the con-
nector (CN1) (Fig. 17) inserted in the probe's red
wire, located on the outside of the control box.
CAUTION
If the cover is still on, remove it and proceed with
the electric wiring following the wiring diagrams.
Use flexible cables in compliance with EN 60 335-
1 standards.
TERRA
C
O
NTROL BOX
Black
White
Blue
Main switch
D7388
Fig. 17