Riello 20162652, Инструкции по установке, использованию и обслуживанию

Страница: 24 / 60

20162733 22 GB
Installation
5.10 Combustion head adjustment
Rotate the screw 1) until the notch you have found corresponds
with the front surface of the screw itself.
The combustion head is opened by turning the screw 1) anti-
clockwise.
The combustion head is closed by turning the screw 1) clockwise
(Fig. 15)
Before starting up the burner, carry out the settings according to
the required output and indicated in the diagram (Fig. 16).
NOTE:
Depending on the specific application, the adjustment can
be modified.
WARNING
The burner leaves the factory with the combustion
head set at notch 0 (Fig. 15).
This setting allows to secure the movable compo-
nents during the transport of the burner.
Fig. 15
20073539
Fig. 16
No. Notches (air = gas)
Max burner output (kW)
20164332
No. Notches (air = gas)
Max burner output (kW)
WARNING
The combustion head can be adjusted within the
following ranges:
RS 410/EV FGR: 5 - 14;
RS 510/EV FGR: 4 - 16;
RS 610/EV FGR: 0 - 4.
The adjustment cannot be carried out outside
these ranges.