Riello 100 kVA, Руководство пользователя

Страница: 31 / 45

UPS
CONFIGURATION
The table below illustrates all the possible configurations available to the user in order to best adapt the UPS to individual
requirements.
CP
(Control Panel)
Indicates that the configuration can be modified from the control panel as well as from the
configuration software.
SW
(Software)
Indicates that the configuration can be only be modified using the configuration software.
FUNCTION DESCRIPTION DEFAULT POSSIBLE CONFIGURATIONS MODEL
Output frequency
Selects the rated output
frequency
(in order for the setting to
become active, it is
necessary to switch the UPS
off and back on again)
50 Hz

50 Hz

60 Hz
CP
Output voltage
Selects the rated output
voltage
(Phase - Neutral)
230V

200V *

208V *

220V

230V

240V

220 - 240 in 1V stages
(from software only)
CP
Operating mode
Selects one of five different
operating modes
ON LINE

ON LINE

ECO

SMART ACTIVE

STAND-BY OFF

FREQUENCY CONVERTER
(from software only)
CP
Power-off due to
minimum charge
Automatic UPS power-off in
battery operation mode if the
charge is lower than 5%
Disabled

Enabled

Disabled
CP
Autonomy limit
Maximum battery operation
time
Disabled

Disabled (complete battery
discharge)

1 - 65000 in 1 sec stages
SW
Battery low
warning
Estimated autonomy time
remaining for the battery low
warning
3 min. 1 - 255 in min stages
SW
Battery test
Interval of time for the
automatic battery test
40 ore

Disabled

1 - 1000 in 1 hour stages
SW
Maximum load
alarm threshold
Selects the user overload
limit
Disabled

Disabled

0 - 103 in 1% stages
SW
Audible alarm
Selects the audible alarm
operating mode
Reduced

Normal

Reduced: does not sound due to
the momentary intervention of the
bypass
CP
Auxiliary socket
(power share)
Selects the auxiliary socket
operating mode
Always
connected

Always connected

Disconnection after n seconds of
battery operation

Disconnection after n seconds
from the battery low pre-alarm
signal

... (see UPSTools manual)
SW
Battery box
capacity
Sets the Ah installed 0 Ah
Min.: 0 - Max.: 999
(in 1 unit stages)
CP
Language**
Selects the language English

English

Italian

German

French

Spanish

Polish

Turkish

Chinese
CP