Riele Photometer 5010 V5+, Руководство по обслуживанию

Страница: 11 / 95

3.3 SERVICE TOOLS
S3 Display Test
The display test is invoked with [START].
For three seconds all pixels of the touch screen are
illuminated.
The test terminates by itself.
[EXIT] leaves the function without any changes.
D I S P L A Y T E S T
E X I T S T A R T
S4 Lamp
The function shows the current lamp voltage. The value
is shown in the second line (e.g. 12.13 V).
With [MIN.] the lamp voltage can be temporarily
reduced. In case of the adjustment of the optical path
the light spot is better to be seen.
With [MAX.] the lamp voltage arises to its normal value.
[EXIT] leaves the function without any changes.
L A M P
1 2 . 1 3 V
E X I T M I N .
S5 Serial No.
The current serial number of the device can be read
and set. The number (e.g. 7001) is shown on the right
upper corner of the window.
A new number can be entered with maximum five
digits.
The input has to be confirmed with [E].
S E R I A L N O . 7 0 0 1
1 2 3 4 5 6 7 8
E S C 9 0 . + - E
RIELE BERLIN Photometer 5010 V5+ 3.3.6 11.03.2009