RIEJU MR 200, Руководство пользователя

Страница: 43 / 78

Maintenance
Change coolant
It must be changed periodically for a long
engine life.
1. Wait for the engine to cool completely.
2. Put the motorcycle in the use position.
3. Remove the radiator cap.
4. Place a container under the drain screw (2)
which is located on the underside of the
water pump cover. Drain the radiator and
engine fluid by unscrewing.
5. Fill the radiator to the rim of the cap and fit
the radiator cap.
6. Check the cooling system for leaks.
7. Start the engine, warm it up and finally stop
it.
8. Check the coolant level when the engine
cools down. Add liquid to the stopper if
necessary.
DANGER
To avoid burns do not remove the radiator cap
or try to change the liquid when the engine is
still hot. Wait until it cools down.
DANGER
If liquid falls on the tires it makes them more
slippery and can cause an accident.
Immediately clean any liquid that may fall into
the chassis, engine or wheels.
Inspect the old liquid. White spots on the liquid
will mean that the aluminium parts of the
cooling system are corroded. If the liquid is
brown it is because the steel or iron parts of the
system are rusted. In both cases clean the
system.
WARNING
Tighten the drain screw on the water pump to 9
Nm. Replace the gaskets with new ones.
Check for any damage, loss or lack of seals in
the cooling system.
Cold countries should adjust the antifreeze
capacity to their minimum temperature with a
margin of -5ºC.
2
43