RIEJU MR 200, Руководство пользователя

Страница: 29 / 78

Operating instructions
Are the spokes of the wheels properly
tensioned?
By pressing them with your fingers
you can notice any possible lack of tension. In
case of excessive looseness in any of them, it
is necessary to check them all and on both
wheels, it is a job for experts, we recommend
that you go to your official RIEJU service
centre.
Is the condition of the chain and its tension
correct?
If it is necessary to tighten the chain,
or if it needs to be tightened too frequent or if
you see any signs of wear on the front
sprocket, rear sprocket, chain guides or chain
protector, you should go to your official RIEJU
service centre, this affects your safety.
Is the seat correctly set ? This is a vital point
for your safety, if you have any doubts about
this, go to your official RIEJU service centre.
Is there any element that runs the risk of
detachment?
Fenders, side covers, fuel tank,
dust covers, etc. If so, you should try to attach it
or take it off completely to avoid it falling off, for
your safety. Contact your RIEJU dealer to
repair it.
Is there any air to be purged from the front
suspension?
(1) If your model requires it, it
must be done properly, otherwise it may be a
problem for your safety and for the longevity of
your front suspension.
Are there any leaks? Visually check for
possible leaks, assessing them based on their
location, amount and product leaked (pay
attention to the danger of fire). Always go to
your official RIEJU dealer as quickly as
possible.
1
29