7
2.0 D
escripTion
of
The
machine
d
EscrIptIon
of
thE
machInE
The DM-250 is a machine that can be used for the following purposes:
The extraction of non-spark-generating* woodworking machines with recirculation of the used air.
The extraction unit consists of filter sleeves with an underlying reservoir and a fan that is based
on negative pressure. The waste is collected by means of a plastic bag. This plastic bag is placed
in the waste container for use. See Figure 1.
*According to the BGI 739 standard, the following machines are defined as spark-generating: crushers, multi-blade circular
saws and broadband sanders used in chipboard, door, frame and parquet production.
Any other use of the extraction unit than descri-
bed in this manual is not permitted!
NOTE
The manufacturer of the extrac-
tion unit has done everything to
provide you with a safe product.
Bear in mind that the extraction
unit is only safe if it is used cor-
rectly. Therefore, read this manual
carefully and make sure that eve-
ryone who starts using the extrac-
tion unit has done the same.
Technical data DM-250
Motor
5,5 kW
Air flow (min.)
3534 m3/h
Pressure at inlet
2100 Pa
Air flow (max.)
5000 m3/h
Filter area
25,4 m2
Filter regeneration
Automatic, offline;
option online (DM-250jet)*
Residual dust content
<0,1 mg/m³
Bin volume
480 Liter
Noise level
70 dB(A)
Voltage
400V/50Hz
Current
10,5 [A]
Weight
580 kg
Dimensions (LxBxH), inlet included
3190 x 880 x 2545 mm
Inlet diameter
250 mm
* Compressed air connection required, not certified
