Riedex DM-200 Скачать руководство пользователя страница 21

Страница: 21 / 27

Open for inspection

The extraction unit is low in maintenance.

The bearings of all applied motors are lu-

bricated for life.

WARNING

Repairing the extraction unit is only permit-

ted by authorized and qualified personnel,

with sufficient training/experience to per-

form maintenance and repair work.

Maintenance and repair work must be re-

gularly documented. Avoid electrostatic

charges when performing maintenance

or repair work. Use only original parts. No

changes may be made to the extraction

unit. This could have consequences for the

type approval!

NOTE

Before starting work, the machine must be

disconnected from the power supply.

NOTE

5.0 m

ainTenance

aIntEnancE

ErIodIc

maIntEnancE

5.1

Daily:

• Check the waste container level

• Visual inspection for visible defects

• Control compressed air via pressure

gauge (Only for DM-250/P)

Monthly*:

• Check the clean side of the filter for

dust deposits. If dust is found, report

this to the supplier, perhaps a filter

leak has occurred

• Checking the rubber seals of the drain

pan

*Executed by a skilled person

Continuous work:

Annually*:

• Checking the screw connections and

switches

• Volume flow test

• Visual inspection of the compressed

air tank (only for DM-250/P)

*Executed by a skilled person

e-mail [email protected]

www.riedex.nl

RIEDEX

Hoofdstraat 17

8811 HD RIED

fax 0517-269366

tel. 0517-269241

Dust extraction system

Aanzichttekening DM-350L

M-3

3565

1280

259

900

500

350

Содержание DM-200




























Результаты поиска

Содержание DM-200

Отзывы:

Бренды по названию

Популярные бренды

Riedex DM-200, Руководство пользователя

Результаты поиска

Содержание DM-200

Отзывы:

Бренды по названию

Популярные бренды