36
1200 Series SmartPanels 1.1 User Manual
0
1
-0
0
0
H
B
0
3
E
G
-B
0
0
Firmware update via web interface
Enter the IP address of the
AES67 interface
(Ethernet connectors)
of the SmartPanel in the web browser of a PC on the same
network.
The IP addresses of the SmartPanel are displayed in the
AES67
.
Do not disconnect the SmartPanel from mains during
the update process.
figure 48: IP address of the
SmartPanel
Open the web interface of the SmartPanel:
·
Enter the IP address in the web browser
(e.g. 192.168.41.159).
In this example there is only one SmartPanel in
the network.
figure 49: web interface of the SmartPanel
The web interface opens.
·
Open on the right side the main menu (
) of
the SmartPanel and select '
Firmware Update
'.
figure 50: Firmware Update
The firmware manager opens.
·
Click on the '
SELECT FW
' button.
·
Navigate to the location of the firmware file
and select the desired one by clicking the
Open
button.
figure 51: select firmware
·
Click on the '
INSTALL
' button.
figure 52: install
The selected firmware is transferred into
the SmartPanel. A bar graph visualizes
the update progress.
figure 53: install
The SmartPanel must be rebooted to
finish the update process.
·
Click on the '
Reboot
' button if the
'
Auto Reboot
' function is disabled.
figure 54: reboot
The device is restarted. The connection is
interrupted during the restart.
figure 55: restarting device
If the connection is re-established after
the reboot, the new firmware version is
active.
figure 56: new firmware
DRAFT
05.10.2020
