26 – English
Appendix D: Camera Installation
1. Align the camera head pins with the sonde’s socket
and push together.
2. Slide push cable locking sleeve onto the camera.
3. To make sure the safety cables end up relatively
straight when you screw the camera onto the spring,
back-twist the camera by approximately 1 ½ turns
(counter-clockwise).
4. The sonde will twist when you thread the camera
onto the spring. Rotate the camera one turn counter-
clockwise to counteract the twisting and then thread
onto the spring.
5. Thread the spring onto the camera until the end of
the spring is flush against the camera head.
NOTICE
Do not over-tighten the spring.
Over-Tightened Spring
www.
GlobalTestSupply
.com
Find Quality Products Online at:
