RIDGID RD8000 Series, Руководство оператора

Страница: 15 / 74

9 — English
ELECTRICAL
CAUTION:
Do not overload the generator’s capacity.
Exceeding the generator’s wattage/amperage
capacity can damage the generator and/or
electrical devices connected to it.
Tool or Appliance
Estimated*
Running
Watts
Estimated*
Additional
Starting Watts
DIy/Job Site
Quartz Halogen Work Light 1000 0
Airless Sprayer − 1/3 HP 600 +1200
Reciprocating Saw 960 +960
Electric Drill − 1/2 HP 600 +900
Circular Saw − 7-1/4 in. 1400 +2300
Miter Saw − 10 in. 1800 +1800
Planer/Jointer − 6 in. 1800 +1800
Table Saw/Radial Arm Saw −
10 in. 2000 +2000
Air Compressor − 1 HP 1600 +4500
*Wattages listed are approximate. Check tool or equipment for actual wattage.
PRODUCT SPECIFICATIONS
ENGINE
Engine Type .......................................... Subaru, EX40 OHC
Bore x Stroke .............................................89 mm x 65 mm
Cooling System ...................................................Forced Air
Compression Ratio ...................................................... 8:1:1
Starting System .........................................Recoil & Electric
Ignition System ........................................................... T.M.I.
Spark Plug .......................................................NGK BR6HS
Engine Lubricant Volume...........................................1.2 qt.
Fuel Volume ................................................................ 8 gal.
FEATURES
GENERATOR
Rated Voltage .....................................................120V/240V
Rated Amps .................................................. 66.7 A / 33.3A
Rated Output ..........................................................8,000 W
Maximum Output..................................................10,000 W
Rated Frequency ........................................................60 Hz
DIMENSIONS
Length ....................................................................... 31 in.
Width .......................................................................... 30 in.
Height ......................................................................... 27 in.
Weight .................................................................... 256 lbs.
KNOW yOUR GENERATOR
See Figure 3.
The safe use of this product requires an understanding of the
information on the product and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AC CIRCUIT BREAKER
The circuit breaker is provided to protect the generator
against electrical overload. The circuit breaker may be reset
by pressing the circuit breaker reset button.
AIR FILTER
The air filter helps to limit the amount of dirt and dust drawn
into the unit during operation.
CHOKE LEVER
The choke lever is used when starting the engine.
ENGINE SWITCH WITH SWITCH KEy
The engine switch is used in combination with the recoil
starter grip to start the generator. To turn the engine off, turn
the engine switch key to “OFF”.
CONTROL PANEL CORD
The 25-ft. control panel cord (Model # RDEC25) has a
120/240 Volt, 20 Amp twist lock plug and a 12 Volt DC engine
control connector on each end. When using this cord with
the removable control panel, appropriate equipment can be
powered through the 2 x 120 Volt duplex GFCI outlets on
the removable control panel.