RIDGID RB-1825, Руководство оператора

Страница: 50 / 52

FCC Compliance
Information
Model Number: RIDGID RBC-30 Battery
Charger
Company: Ridge Tool Company
Address: 400 Clark Street, Elyria, Ohio
44035-6001
Tel.: (800) 519-3456
Compliance Statement: This device complies
with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1)
This device may not cause harmful interfer-
ence, and (2) this device must accept any in-
terference received, including interference that
may cause undesired operation.
Warning: Any changes or modifications to this
unit not expressly approved by the party re-
sponsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interfer-
ence in a residential installation. This equip-
ment generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communi-
cations. However, there is no guarantee that
interference will not occur in a particular instal-
lation. If this equipment does cause harmful in-
terference to radio or television reception,
which can be determined by turning the equip-
ment off and on, the user is encouraged to try
to correct the interference by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equip-
ment and receiver.
— Connect the equipment into an outlet on a
circuit different from that to which the re-
ceiver is connected.
— Consult the dealer or an experienced
radio/TV technician for help.
RBC-30 Battery Charger
999-995-193.10_REV. C
48