background image

2 - English

 WARNING

Read all safety warnings, instructions, 
illustrations and specifications provided with 
this power tool. 

Failure to follow all instructions 

listed below may result in electric shock, fire and/
or serious injury. 

Save all warnings and instructions for future reference. 

The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) 
power tool.

WORK AREA SAFETY

 

Keep work area clean and well lit. 

Cluttered or dark 

areas invite accidents.

 

Do not operate power tools in explosive atmospheres, 
such as in the presence of flammable liquids, gases 
or dust.

 Power tools create sparks which may ignite the 

dust or fumes.

 

Keep children and bystanders away while operating a 
power tool. 

Distractions can cause you to lose control.

ELECTRICAL SAFETY

 

Power tool plugs must match the outlet. Never modify 
the plug in any way. Do not use any adapter plugs with 
earthed (grounded) power tools. 

Unmodified plugs and 

matching outlets will reduce risk of electric shock.

 

Avoid body contact with earthed or grounded surfaces, 
such as pipes, radiators, ranges and refrigerators. 

There is an increased risk of electric shock if your body 
is earthed or grounded.

 

Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of 
electric shock.

 

Do not abuse the cord. Never use the cord for carrying, 
pulling or unplugging the power tool. Keep cord away 
from heat, oil, sharp edges or moving parts. 

Damaged 

or entangled cords increase the risk of electric shock.

 

When operating a power tool outdoors, use an 
extension cord suitable for outdoor use. 

Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

 

If operating a power tool in a damp location is 
unavoidable, use a ground fault circuit interrupter 

(GFCI) protected supply.

 Use of a GFCI reduces the risk 

of electric shock.

 

Use this product only with battery packs and 
chargers listed in tool/appliance/battery pack/charger 
correlation supplement 988000-302.

PERSONAL SAFETY

 

Stay alert, watch what you are doing and use common 
sense when operating a power tool. Do not use a power 
tool while you are tired or under the influence of drugs, 
alcohol or medication.

 A moment of inattention while 

operating power tools may result in serious personal injury.

 

Use personal protective equipment. Always wear eye 
protection.

 Protective equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used 
for appropriate conditions will reduce personal injuries.

 

Prevent unintentional starting. Ensure the switch is in 
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. 

Carrying 

power tools with your finger on the switch or energizing 
power tools that have the switch on invites accidents.

 

Remove any adjusting key or wrench before turning 
the power tool on. 

A wrench or a key left attached to a 

rotating part of the power tool may result in personal injury.

 

Do not overreach. Keep proper footing and balance at 
all times. 

This enables better control of the power tool in 

unexpected situations.

 

Dress properly. Do not wear loose clothing or jewelry. 
Keep your hair and clothing away from moving parts. 

Loose clothes, jewelry or long hair can be caught in moving 
parts.

 

If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used. 

Use of dust collection 

can reduce dust-related hazards.

 

Do not let familiarity gained from frequent use of tools 
allow you to become complacent and ignore tool 
safety principles. 

A careless action can cause severe 

injury within a fraction of a second.

 

Do not wear loose clothing or jewelry. 

Contain long hair. 

Loose clothes, jewelry, or long hair can be drawn into air vents.

 

Do not use on a ladder or unstable support. 

Stable 

footing on a solid surface enables better control of the 
power tool in unexpected situations.

GENERAL POWER TOOL SAFETY WARNINGS

Содержание R862311

































Отзывы: