RIDGID R4231, Руководство оператора

Страница: 20 / 36

20
• ALWAYS turn the power off and unplug saw before transporting.
• Secure power cord to avoid any snags or hang ups during transportation.
• ALWAYS lift using the strength of your legs to lift saw; never use your back muscles to lift saw.
• DO NOT
use power On/Off switch handle or power cord to lift your saw.
• ALWAYS place the saw onto a stable and level surface with clearance for handling and maneuvering.
Before moving/transporting your saw it is important to make sure all of the following steps have been followed to
ensure a safe condition for transportation. Failure to do so can result in serious personal injury.
Saw Head Lock Pin
See in Figure 20.
ALWAYS lock saw head in the down position before
transporting saw. To engage saw head lock pin
F20
:
1.
Push saw head to the down position then push in lock
pin.
Saw Head lock pin is for storage and
transport only. This saw should never be locked in the down
position while making cuts.
Slide Lock Lever
ALWAYS engage the slide lock lever
F19
before transporting
this saw. To engage slide lock lever:
1.
Push saw head to the fully retracted position then swing
the slide lock lever down as shown in Figure 20.
Carry Handle
For transportation use the included carry handle
F18
and
base recess
A
as shown in Figure 21.
Figure 20
MOUNTING AND TRANSPORTATION
PREPARATIONS FOR TRANSPORTATION
Figure 21
F20
F19
F18
A