Ridetech airpod Series, Инструкция по установке и эксплуатации

Страница: 15 / 20

15
Adjusting light intensity:
To activate programming sequence for the 2 display
settings below, start by holding down Air Ride Logo
button for 3 seconds then hold down #1 and #3
simultaneously. The display will not change.
Display Intensity:
Activate programming sequence above.
This will alter the brightness of the VFD display. This
can also be dimmed by applying 12 volts to the
green wire in the main power harness.
Button Backlight Intensity:
Activate programming sequence above.
This will alter the brightness of the LED backlights for
the buttons.
Use the right front
ate (+/-)
buttons to adjust the
display intensity.
ate/
ate (+/-) buttons to
adjust the backlight
intensity.
Programming & Features