Ridetech airpod Series, Инструкция по установке и эксплуатации

Страница: 13 / 20

13
Additional Settings & Features
“Ride Height on Start” Feature - Enable or Disable:
ignition is turned ON. With the “Ride Height on Start” feature
ate
buttons will ALL be illuminated. Simply press the Air Ride Logo
programming button to activate or deactivate this feature.
Display View Options:
Press and hold the Air Ride Logo Button
for 3 seconds until the Air Ride Logo
Button is illuminated.
Press preset button #1, 2, or 3 to change display settings.
Normal operation will resume after 10 seconds or by pressing the Air Ride button.
Programing Remotes:
If you have the optional key fob remote controls, you will be able to active the 3 presets from outside the vehicle. The
rst be programmed to
c ECU. Up to 3 remotes can be programmed.
1 - With ignition on, press the Air Ride Logo Button 3 times, the Logo button will illuminate.
1. Numeric
(air pressure)
2. Bar graph
(level sensor)
3. Numeric with bar
graph [both].
2 - Press button #1
rst remote,
the Logo button
momentarily.
3 - After the logo
button lights again,
press button #1
on the second
remote, the Logo
momentarily.
4 - After the logo
button lights again,
press Press button
#1 on the third
remote, the Logo
momentarily.
Normal operation will resume after 10 seconds or by pressing the Air Ride button.
“Ride Height on Start”
feature - ON:
“Ride Height on Start”
feature - OFF:
Programming & Features
The systems can use up to
3 remotes - 2 are included
in the remote kit.