RIDEON USER MANUAL
– PAGE
27
3.
Now replace the lens and place it into the frame.
4.
Gently
Close the lens lock until it clicks securely into place. Your new lens is now secure.
SEE-THROUGH DISPLAY CARE
Although this device plays the star role in RideOn goggles, there isn’t too much care involved on your
end. Use a dry, soft fabric to wipe away any dust. As always, be delicate and careful and refrain from
pressing hard on the component.
LONG-TERM STORAGE
Guidelines for correct storage:
1.
Store dry -
Make sure the goggles are dry before putting them in storage.
2.
Store away from direct sunlight
.
3.
RideOn’s box
-
We recommend storing RideOn goggles in their original packaging. It’s stylish and
sturdy.
4.
Off-season charging and updating
-
You should charge your unused goggles every three months
and update the software. This will keep your goggles relevant, and you can test out the new
features in SIM Mode.
BATTERY
This section describes battery charging and care for performance.
WARNING: DO NOT PUT GOGGLES ON YOUR HEAD WHILE CHARGING!
Instructions for charging and charging indications:
1.
Turn goggles
off -
Long-press on the goggles power button. The goggles are off completely when
there is no green LED light near the power button.
2.
Power source -
Connect USB cable to a power source.
3.
Power outlet cover -
On your goggles, lift the rubber power outlet cover, next to the power
button.
4.
Power jack -
Plug the micro-USB jack of the USB cable into the goggles power outlet.
NOTE:
The maximum charger current is 1.1A.
5.
Charging
-
The LED next to the goggles power button should glow red.
6.
Goggles are fully charged
- The LED will turn off completely when the goggles are fully charged.
2
1
3
4
2
3
