RIDEON USER MANUAL
– PAGE
25
MAINTENANCE
CONCEPT
Our product was designed to combine the complexity and sophistication of AR with the durability
expected of sports equipment. Integrating these qualities successfully was not an easy task, but we did
it. In order for you to continue enjoying your RideOn goggles for many years to come, follow these
instructions for maintenance and care. Your goggles will thank you for it
☺
Five areas of maintenance:
1.
General Goggle Care
2.
Lens Cleaning
3.
Lens Replacement
4.
See-Through Display Care
5.
Long-Term Storage
6.
Battery
GENERAL GOGGLES CARE
1.
Water & Moisture -
Keep the electrical components of your goggles away from water. As much
as possible, avoid situations in which moisture and humidity could accumulate in and around
your goggles. For example, avoid resting the goggles on your head for long periods of time if you
are perspiring.
2.
After skiing
-
Enjoy your après ski, then keep goggles in a safe area where they’re unlikely to fall
or be crushed by feet.
3.
While traveling
- Wrap your goggles in protective material like bubble wrap to avoid
unnecessary jostling of the electronics.
LENS CLEANING
Do
NOT
rub the lens if it is wet!
If there is snow or water on either side of the lens:
1.
Gently
shake snow/water of from goggles
2.
Gently
clear ventilation foam of any snow
3.
Gently
absorb remaining water with tissue. Pat dry, do NOT wipe! Wiping may cause small
scratches.
Once all snow or water has been cleared and goggles are dry, use micro fiber and gently wipe lens to
remove any dust or oily finger prints.
