Riden RD6006P, Инструкция по эксплуатации

Страница: 23 / 35

RD6006P will obtain the IP address of your phone(picture 24), if it shows right,
confirm that “device display sever IP”, and click
“Confirm”, wait 30s (picture 25)
，
APP show
connection successful, RD6006P will start
automatically, the network distribution success,
return to the main page and click connect.
If the distribution network fails, please power
off the module and re-operate in the same way
(multiple networking failures you can watch the
video and try to use the hotspot of the mobile phone to test).
3.2.3.2 Proper Wi-Fi Connection
When power on RD6006P, it will connect Wi-Fi first, and then detect if it can be
connected to APP, and it may not be connected successfully if the phone is under
screen-lock status or the APP is running at the background. If the IP address of the
phone has changed, you need to press the button and then press button
to reset the net, repeat 2.2.3.1 operation.
3.2.3.3 APP Operation
IOS APP operation video:
https://drive.google.com/drive/folders/1kwycXmbV_wkSYuT7KxuYsmXHV70KDyiq?usp=sharing
Click “BY” / ” BZ ” text label and enter the value to set the output voltage/
output current, then click at the blank area to return, if you enter a value exceeds the
limit, it cannot be applied. Click “BS” to exports the voltage-current curve to excel file,
up to 24 hours document can be recorded.
Click the personal center to set the software language or get help to use the
APP.
Picture 22 Picture 23
Picture 24