Riden RD6006P, Инструкция по эксплуатации

Страница: 7 / 35

P: Input fuse Q: Output fuse
R: Power source input interface S: External temperature sensor interface
T: CR1220 battery socket U: Communication module interface
V: Fan interface
NOTE:
Power source input interface must be
connected to 7-70V constant DC power source. The
external sensor cable (as shown on right) must be
connected to the external temperature sensor
interface. The fan interface cannot be connected to
other fans. When the system temperature is higher than 80
℃
, the output will be
shut down and show OTP on the screen. CR1220 is the clock battery (Please prepare
by yourself) , it can power on the clock function. Communication interface is a special
interface, please don’t connect to other modules or cables.
You can see the Wi-Fi module and RS-485 module in the picture below. If you
need RS-485 for industrial batch test , if you want to use that, please contact us to
see if it supports RS-485.