Part III Basic Knowledge and Operation
BECS-09 Singular-head Computerized Embroidery Machine 17
backward along the stitch trace with the main shaft not rotating.
If the machine is set as high-speed floating, when the user presses the
startup button, the frame and the main shaft will remain still and the stitch
count is added; when the stop button is pressed, the frame will move directly to
the position corresponding to the current stitch count. When the user presses
the stop button, the frame and the main shaft will remain still and the stitch
count is reduced; and when the stop button is pressed, the frame will move
directly to the position corresponding to the current stitch count.
The user has to ensure before embroidery that the system is in normal
embroidery mode.
3. Work sequence
Threads of different colors are required for a complicated design. This is
often based on color blocks in the design. The work order is to preset whether
to change thread for every color block.
When embroidery is started up with the work sequence effective, the
machine will automatically change thread according to the set sequence.
Otherwise the user should set in the manual operation before embroidery.
The user can choose whether to use the work sequence by the key "
".
When the work order is effective, it’s displayed in highlight in the main screen.
Otherwise it’s displayed in darkness. The operator has to decide whether to use
the work sequence before embroidery.
The setting of the work sequence is in the operation of parameter input.
