Part II Control and Basic Operations
10 BECS-09 Singular-head Computerized Embroidery Machine
picture.
3. Embroidery speed:
It shows the current set value of rotation speed when
there is no embroidery and for an instant when the user presses the acceleration
key “
” or deceleration key “
”. It shows the current rotation speed
during embroidery, like "300" in the above picture.
4. Stitch count:
It counts the stitches since the last clearance of the number,
like "51" in the above picture. Press the key “ ” on the panel and press
“ ” to confirm. Then select “Clear Add Stitch” to reset the count. Otherwise
press “ESC" to exit operation.
5. Frame coordinate:
It can set the last design’s frame position as the zero
point of coordinates, like “X+123.5 Y-201.1” in the above picture. Press the
key “ ” on the panel, select the second option “Clr Frame Coordinate”
and confirm by pressing “ ”, so as to reset the coordinate value.
Otherwise press “ESC” to exit.
2.3 Definition and Basic Operation of Keys
1) Function key:
—
Disk operation
This is for all the operations concerning the disk, including listing designs
in floppy/USB disk, inputting floppy-disk/USB designs into memory, inputting
design data into memory by PC COM port, deleting disk designs, outputting
design data to floppy/USB disk, formatting floppy/USB disk, etc.
CL
CL
