15
Powering the Camera
Use the rechargeable lithium-ion battery D-LI92 that is provided with the camera.
1
Open the battery/card cover.
Press the battery/card cover lock lever in the direction shown
1
, slide the cover
towards
2
and open it towards
3
.
2
Using the side of the battery to press the battery lock lever in
the direction of
4
, insert the battery with the PENTAX logo
pointing toward the lens.
Push the battery in until it is locked in place.
3
Close the battery/card cover.
Push down and slide the battery/card cover with steady but gentle force in the
opposite direction indicated by
2
.
The battery/card cover may be difficult to close because the waterproof packing
is very thick to prevent water from entering the camera.
To close the battery/card cover, push down on it toward the camera with your
thumb where it says [PUSH]. Then slide it until the battery/card cover lock lever
slides into place covering the yellow mark on the lock lever.
Installing the Battery
If the battery is incorrectly oriented, malfunction may result.
Battery/card cover
lock lever
Battery lock lever
Battery/card
cover
Battery
Содержание WG-60
Страница 62: ...Memo ...