In the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Operators] menu, set
0304: [Correct Output Paper Curl] to " Curl Correction Level". To control the level of decurling, select
"Weak" if the present setting is "Off" or "Strong" if the present value is "Weak".
Large Delivered Sheets Are Not Stacked Properly
Cause:
When using large-size or coated and paper-to-paper friction is very high, a sheet may push against
another or paper deflection may occur.
This may occur if:
• B4 , 8
1
/
2
" × 14" , or larger size of paper is used.
• Paper that produces high paper-to-paper friction is used.
• The temperature or humidity is high.
Sheet bending
The leading edge of the delivered sheet bends upward and backward.
Output tray
Paper exit
Paper feed direction
CEZ594
One sheet pushing out another
Because of high paper friction, the delivered sheet may get stuck and push out other sheets of
paper.
9. Post-Processing Option Troubleshooting
132
Содержание TCRU/ORU
