Ricoh TC-II, Руководство по эксплуатации

Страница: 40 / 64

Troubleshooting
30
3
If You Cannot Make Prints as You Want
Problem Cause Action
Misfeeds occur frequently. Improper paper type is select-
ed. Select proper paper type.
⇒
Refer to the master making
unit's operating instructions.
Parts of the image are not
printed. The image is too wide. • Set larger size paper.
• Return the drum unit to
the master making units,
and then reduce the print
image size.
Print shadow appears. The background image densi-
ty is too high. • Switch drum 1 and 2.
• Set thick paper.
The print image appears too
light. The print speed is too fast. Lower the print speed.
Scratches appear on the print
image. Sharp edges in the machine
may have scratched your
prints. • Increase the print speed.
• Set thick paper.
The images of drum 1 and 2
do not mix well together. If the image density is too
high, the background color
might appear strong. • Switch drum 1 and 2.
• Use the image of drum 1
for background.
2nd printing with another
drum is unsatisfactory. The 1st print image is still wet. Wait until the 1st image be-
comes dry.
Roller marks appear when
you print onto the reverse side
of paper. 1st printed image is still wet
and the press roller becomes
dirty. • Wait until the 1st printed
image becomes dry.
• Wipe off the ink on the
press roller.
⇒
P.41 “When
the Press Roller is Dirty”
An uneven solid image ap-
pears. Large solid image wrinkles
the master. • Increase the print speed.
• Set thick paper.
• Use Drum2 for a large sol-
id image.
• Use Quality Standby mode
by pressing the
{
Clear Mode
}
key for more than 3 seconds.
• Return the drum unit to
the master making unit,
and then remake the mas-
ter with economy mode or
quality start mode.
• When you make master,
make a few trial prints,
and then return the drum
unit to this machine.
⇒
Refer to the master making
unit operating instructions.