Ricoh SP 330SFN Скачать руководство пользователя

Страница: 204 / 333

Updating the Firmware

M0C3/M0C4/M0C5/M0C6/M0C7

5-70

Messages

Causes

Solutions

The USB printer driver is not

installed in the computer.

Install the USB printer driver in

the computer.

The machine is turned off or an

error has occurred.

Turn the machine’s power off,

wait a moment, and then turn

it back on again. Then perform

the update again.

The IP address specified for

either the machine or the

computer is invalid.

Check that both IP addresses

are valid.

The machine is not connected

to the network properly.

Check that the machine is

properly connected to the

network.

The models are not the same.

The machine you were trying

to update was not the correct

model for the firmware you

have downloaded from the

website.

The firmware packages on the

website are each designed to

be used for a specific model,

and cannot be used for any

other model.

Check the model of the

customer's machine, and

download the appropriate

firmware package for its

model.

USB Upload: Failed

The USB cable was

disconnected immediately after

the [Firmware Update (USB)]

button was clicked.

Turn the machine’s power off,

wait a moment, and then turn

it back on again. Disconnect

any unnecessary cables from

the machine, and then try

again.

USB Upload: Finished

The firmware has been

transferred to the machine

successfully.

Wait until the machine

restarts.

Содержание SP 330SFN














































































































































































































































































































































Результаты поиска

Содержание SP 330SFN

Отзывы:

Похожие инструкции для SP 330SFN

Бренды по названию

Популярные бренды

Ricoh SP 330SFN, Руководство по обслуживанию

Результаты поиска

Содержание SP 330SFN

Отзывы:

Похожие инструкции для SP 330SFN

Бренды по названию

Популярные бренды