RICOH SP 311DNw B&W Network Laser Printer
Getting Started Guide
32
Appendix
E
Add New Port
If you would like to bypass the install wizard and have more control over printer port
creation, the steps for manually adding a port are outlined below.
Before proceeding, please check the following
:
•
Printer power switch is On.
•
Network is connected and configured.
•
Printer’s
IP address
is available. If the printer was previously configured, with IP address assigned,
the Configuration Report show the address. See
Appendix B: Print Configuration Report
.
To add a new printer port, proceed as follows:
1.
Click [
Start
]
[
Devices and Printers
].
2.
Right-click [
RICOH SP 311DNw
] icon.
3.
Select [
Printer properties
].