manualshive.com logo in svg

Ricoh Soleil-PJ WX4130, Руководство по обслуживанию на месте, Страница: 16 / 100

Поделиться
Скачать
Ricoh Soleil-PJ WX4130 Скачать руководство пользователя страница 16

• Inputting numbers

Use the number buttons on the remote control to input numbers.

• Inputting text (Y012 only)

Use the keyboard that is displayed on screen to input text.

• The control panel on the projector can be used for operations, but numbers for settings

cannot be input.

• A confirmation screen appears before some functions are executed or some settings are

changed.

• The Network/USB Settings menu has three submenu screens, [USB Settings], [Network

Settings], and [Network Application Settings]. Open the submenu according to the
settings you want to change, and then go to step 2 to change the settings.

• Changes to the settings are automatically applied when you close the menu screen. You

do not need to press the Enter button.

• Settings in the Network/USB Settings menu are not applied until you select [Reflect] on

the confirmation screen.

2. Installation

14

Содержание Soleil-PJ WX4130





































































































Отзывы:

Нет отзывов