Ricoh Soleil-PJ WX4130, Руководство по обслуживанию на месте

Страница: 11 / 100

2. Installation
Installation Requirements
• Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.
• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.
• Do not place the product or use it in an environment where it might get wet such as from snow, rain,
or being near water. Doing so could result in fire or electric shock.
• Do not place the power cord and connection cable in a way that might cause someone to trip and
fall. The product might fall over and cause an injury.
• Do not place the product in a location where air flow is poor. Doing so may cause fire due to
internal components becoming overheated.
• Do not place or store the product in a location where direct sunlight or heat generation might
occur. The heat may deform or wear out the exterior parts or negatively affect internal parts. Doing
so could result in fire.
• Do not expose the product to salt air or corrosive gas. Also, do not place the product in a
laboratory or other location where a chemical reaction might occur. Doing so may cause the
product to malfunction.
• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.
• Do not use any power sources other than those that match the specifications shown. Doing so could
result in fire or electric shock.
• Do not use any frequencies other than those that match the specifications shown. Doing so could
result in fire or electric shock.
• Do not damage, break, or modify the power cord. Also, do not place heavy objects on the power
cord, or pull the cord or bend it severely. Doing so could result in fire or electric shock.
• When using an extension cord or power strip, only connect equipment whose total power
consumption is within the power rating for the extension cord or power strip. If the power rating is
exceeded, it may cause heat buildup and result in fire.
• Push the power plug all the way into the power outlet. Do not use a power outlet with a loose
connection. Doing so may result in heat buildup. Plug the power cord in the correct direction into
the base. If they are not plugged in correctly, it could result in smoke, fire, or electric shock.
• Avoid locations with oil or cigarette smoke. Doing so will make the optical parts dirty, shortening
their lives, and darkening the screen.
• Moving the projector from a low-temperature room to a high-temperature room may cause
condensation on the lens or internal parts. If you continue to use it in that situation, it may
malfunction. Wait until the condensation naturally disappears.
9