Ricoh Ri 1000 Скачать руководство пользователя страница 138

Страница: 138 / 141

RICOH Ri 1000

User Manual

138

10 About Open Source Software License

ZLib

This software is provided 'as-is', without any express or implied

warranty. In no event will the authors be held liable for any damages

arising from the use of this software.

Permission is granted to anyone to use this software for any purpose,

including commercial applications, and to alter it and redistribute it

freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not

claim that you wrote the original software. If you use this software

in a product, an acknowledgment in the product documentation would be

appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be

misrepresented as being the original software.

3. This notice may not be removed or altered from any source distribution.

Jean-loup Gailly Mark Adler

[email protected] [email protected]

Содержание Ri 1000














































































































































Результаты поиска

Содержание Ri 1000

Отзывы:

Похожие инструкции для Ri 1000

Бренды по названию

Популярные бренды

Ricoh Ri 1000, Руководство пользователя

Результаты поиска

Содержание Ri 1000

Отзывы:

Похожие инструкции для Ri 1000

Бренды по названию

Популярные бренды