Ricoh RDC-7, Руководство по эксплуатации

Страница: 25 / 128

23
Getting Started
1
Powering the Camera
This section explains how to load and charge the battery, and how to connect
the AC adapter to power the camera from a household electrical outlet.
Charging the Battery
When using the camera for the first time or when the battery symbol ( ) lights,
charge the battery to its full capacity following the procedure described below.
q
Set the battery on the battery charger.
w
Insert the plug into an electrical outlet.
Charging will start and continue as shown below. When charging is completed,
disconnect the power plug from the power outlet.
■
Precautions
• Do not use the batteries other than the Ricoh DB-20.
• Use only a Ricoh BJ-1 battery charger to charge the battery.
• Do not use the BJ-1 battery charger to charge batteries other than the DB-20
battery.
• Charge the battery in a well ventilated area with an ambient temperature of
10°C – 40°C (50°F – 104°F).
• When the battery reaches the end of its service life, even if charged correctly,
it will be effective for shorter and shorter periods. Replace with a new battery.
• After charging, the battery will feel hot, but this is normal.
• After charging, remove the power plug from the electrical outlet. Failure to do
so may result in fire.
Charge lamp Contents
Lights red Charging has started.
Lights green The completion of charging (90% of full charge), after
approximately 60 min.
Lamp off Full charge has been reached, approximately 40 min. after
the lamp lights green.