Ricoh RCP80, Руководство по эксплуатации

Страница: 33 / 84

Windows NT 4.0
27
1
❖ ❖ ❖ ❖
“Eco. Mode”
When set to “On”, the amount of ink consumption is reduced.
❖ ❖ ❖ ❖
“Speed Select”
You can select the printing speed.
❖ ❖ ❖ ❖
“Skip Feed”
• Use to make the interval between paper feeds longer, allowing the ink
to dry.
• Use to print paper longer than the standard size.
Limitation
❒
The maximum length of paper that can be printed using Skip Feed is
460mm. However, when printing on paper longer than 432mm, the de-
livered paper may fall off the paper delivery end plate. Therefore, you
should hold the paper so that it does not fall off.
❖ ❖ ❖ ❖
“Job Separator”
When set to “On”, classifying will occur whenever the document data
changes.
❖ ❖ ❖ ❖
“Sort”
When set to “On”, it is possible to deliver each print set in page order into
the optional sorter.
❖ ❖ ❖ ❖
“Rotate”
When set to “180
°
”, the image will be rotated 180 degrees and printed. This
is very convenient when printing on envelopes.
⇒
p.31 “Printing onto en-
velopes”
❖
❖ ❖
❖
“Color Separation”
It is possible to output only the color selected from Cyan, Magenta, Yellow,
and Black. If “No” is selected, separation will not be done.
[ Job Log ] Tab
This tab is used to adjust the settings for plug-in modules. The plug-in modules
are modules that provide additional functions that cannot be implemented by
the printer driver or PPD file.
Limitation
❒
These functions cannot be accessed from applications that use their own
printer driver, such as PageMaker, etc.
Note
❒
The settings adjusted using this tab are used until the values for the settings
are adjusted again.