Ricoh RCP80, Руководство по эксплуатации

Страница: 30 / 84

PostScript 3 - Setting Up for Printing
24
1
❖ ❖ ❖ ❖
[ Font Substitution Table ]
Edit the TrueType Font Substitution Table.
• Font Substitution
You can set whether to replace fonts that are on the Font Substitution Table
with any other fonts. Replacing a TrueType Font and the printer font can
speed up printing.
A When a “
n
” is displayed on the left side of the [ Font Substitution Table ] ,
click it and the items below will be displayed. A list of the fonts installed
on the computer will be displayed.
B Click the name of the TrueType font to be replaced.
C Click the name of font to replace the TrueType font from the fonts dis-
played below.
In the < > of the
[ Font Substitution Table ] the font used for replacement is
displayed.
D After the replacement settings are complete, click [ OK ] .
• There may be slight differences between the screen and the printed
output such as the carriage position, when font replacement is per-
formed.
❖ ❖ ❖ ❖
[ Available PostScript Memory ]
The memory capacity of the machine is displayed. Normally this does not
have to be set here.
❖ ❖ ❖ ❖
[ Output Protocol ]
Select the data communication protocol. When connected to a parallel inter-
face, select “ASCII”. An error may occur if other protocols are used.
❖ ❖ ❖ ❖
[ Installable Options ]
Set connected option devices. The following items are installable:
• Sorter
• Memory Unit