Ricoh pro c901, Технический бюллетень

Страница: 364 / 586

T
echnical
B
ulletin
PAGE: 4/5
Reissued: 09-Nov-12
Model:
Aries-C1.5/P1.5, AG-C1/P1, AGL-C1/P1,
B-C3/C3.5/C4, DDP
Date:
11-May-06
No.:
RB234014o
Version Modified Points or Symptom Corrected
1.500 Symptom Corrected:
1. Operation stops and will not recover when "stop" button on VICTORIA-E_LED
is pressed during stacker exit.
2. Deactivate request cannot be cancelled at Plockmatic connection.
3. Deactivate request cannot be cancelled at GBC connection.
4. Under the condition of having no staples, jam occurs when staple function is
released after its operation has been stopped.
5. In Aegis-P1, paper cannot be fed when Plockmatic is connected; indicator
shows "full" in shift tray.
Other changes:
1. Under staple-mode, single sheet of paper ejected to the shift tray will not be
stapled.
※
Although display differs in version-up Finisher Version (1.500:53) and SP mode
Version (1.500:52), there is no problem as long as the SP mode Version is set to
"1.500".
1.420:51 Changes:
Support for Aegis-C1/P1.
1.400:50 Symptom Corrected:
・
When the SP adjustment value for the Jogger is set to +1.5mm, the Jogger
gradually widens and results in misaligned sheets.
1.310:48 Symptom Corrected:
1. When a jam occurs at the GBC, the number of sheets of recovery is different.
(The 1st sheet is omitted.)
Other changes:
1. Support for Plockmatic SRA3 size.
1.160 Symptom corrected:
1. JAM 230 sometimes occurs, and the VICTORIA does not send its self-status
to machine.
2. Sometimes the VICTORIA cannot align the paper correctly when stapling.
3. If GBC punch is selected during a copy job already set for 3-hole punching,
the paper is punched by both the VICTORIA and the GBC punch unit.
1.140 Symptom corrected:
1. The machine stalls and displays "Copying..." if the top sheet on the shift tray
is removed after the tray is full.
Note: When this occurs, copies cannot be made.
2. The machine displays SC625 instead of a "jam" message when an exit jam
occurs with stapled paper.
3. Sometimes, the punch motor does not turn ON.
4. The last sheet of a staple job is not stapled correctly.
Conditions: 2 sheets/set, A4 LEF
5. Jam 111
6. The shift tray does not shift (stacking only) after an exit jam at the shift tray is