Ricoh Priport DX 4640PD Скачать руководство пользователя страница 165

Страница: 165 / 240

Adding Ink

153

Note

❒

Be sure to supply ink of the same colour as the current drum.

❒

Store ink in a cool, dry place. Do not store ink where it will be exposed to heat
or direct sunlight.

❒

Store ink on a flat surface.

• 1: Open the front cover.

2: Pull out the ink holder.

• 3: Remove the used ink cartridge.

• 4: Remove the cap of the new ink cartridge.

• 5: Insert the new cartridge into the ink

holder.

Note

❒

Always supply ink of the same colour.

• 6: Return the ink holder to its original posi-

tion until it clicks.
7: Close the front cover.

The machine will start idling to supply ink to
the drum.

AUX122S

AUX123S

AUX124S

AUX125S

AUX126S

Содержание Priport DX 4640PD

















































































































































































































































Результаты поиска

Содержание Priport DX 4640PD

Отзывы:

Бренды по названию

Популярные бренды

Ricoh Priport DX 4640PD, Руководство по эксплуатации

Результаты поиска

Содержание Priport DX 4640PD

Отзывы:

Бренды по названию

Популярные бренды