Ricoh Priport DX 4640PD Скачать руководство пользователя

Страница: 187 / 240

Removing the Used Master

175

Removing the Used Master

When

lights, it is time to empty the

master eject unit. It also lights when
the master eject unit is not set proper-
ly.

Note

❒

Ink is easily removed from skin by
waterless hand cleaners followed
by washing with soap and water.

❒

Be careful not to get any ink on
your clothing while emptying the
master eject unit.

❒

When Higher Security is on, you
have to enter the security code to
unlock the master eject unit.

Prepare a container for the used
master.

Open the front cover.

Use handle (E1) to pull out the
master eject unit until it stops.

Pull up handle (E2) and pull out
the master eject unit completely.

Hold the master eject unit upper
handle and turn it clockwise with
one hand while holding handle
(E1) with other hand (1).

Remove the used master by push-
ing down the handle (1) towards
the waste container (2).

Note

❒

If you cannot remove the used
master completely, repeat step

until all the master is re-

moved.

Reinstall the master eject unit,
making sure it clicks into posi-
tion.

Close the front cover.

AUX127S

AUX128S

AUX129S

Содержание Priport DX 4640PD

















































































































































































































































Результаты поиска

Содержание Priport DX 4640PD

Отзывы:

Похожие инструкции для Priport DX 4640PD

Бренды по названию

Популярные бренды

Ricoh Priport DX 4640PD, Руководство по эксплуатации

Результаты поиска

Содержание Priport DX 4640PD

Отзывы:

Похожие инструкции для Priport DX 4640PD

Бренды по названию

Популярные бренды