Ricoh PJ WUL5860, Руководство пользователя

Страница: 34 / 86

32
English
Basic Operations
Powering On the Projector
1. Ensure that the power cord and signal cable are securely
connected. The Power indicator will turn red.
2. Remove the lens cap (if applicable).
3. Turn on the projector by pressing the “ Power” button on
the control panel or the button on the remote control.
The Power indicator will fl ash blue.
The startup screen will display and the Power indicator will
turn blue.
4. Turn on your source (computer, notebook, video player,
etc.) The projector will detect your source automatically.
Make sure that the “Auto Source” has been set to “On”.
Powering On/Off the Projector
1 2 3
5
8
ID Set 0 MHL
6 4
7 9
+
-
+
-
AV Mute
Autoset ECO Input
Picture
Enter
Aspect
Menu
Keystone Freeze
Computer
HDMI Video Digital
Status
Magnify Volume
Power
OR
CAUTION:
• Do not look into the lens while the laser is on. The strong light from the
laser may cause damage to your eyesight.
• Do not block the air intake or exhaust. Doing so could cause a fi re due to
internal overheating.
• Do not place your hands, face, or other objects near the air exhaust, or
the bottom of the unit. Doing so could result in injury and/or damage the
object.

If you connect
multiple sources at
the same time, press
“Input” on the control
panel or the desired
source button on the
remote control to
switch inputs.

Turn on the
projector fi rst and then
the signal sources.
Note
Enter
Power
Input
Menu
AV Mute
Power Lamp Temp