Ricoh PJ WUL5860, Руководство пользователя

Страница: 28 / 86

26
English
Introduction
Remote Control ID Setup
The IR remote allows individual addressing of projectors. The
projector can be set with a specifi c number from “1” to “99” as
its address, and it only responds to the IR remote set to the same
ID code. ID code “0” is the default value of the IR remote, and
all projectors will respond to the IR remote set to “0”.
Follow below methods to set up the IR remote:
ID Code Change Method
1
Press “ID Set” for 3 seconds, and press “0” then
“1”within 2 seconds.
2
Press “ID Set” for 3 seconds, and press “0” then “2”
within 2 seconds.
3
Press “ID Set” for 3 seconds, and press “0” then “3”
within 2 seconds.
... ...
10
Press “ID Set” for 3 seconds, and press “1” then “0”
within 2 seconds.
11
Press “ID Set” for 3 seconds, and press “1” then “1”
within 2 seconds.
... ...
98
Press “ID Set” for 3 seconds, and press “9” then “8”
within 2 seconds.
99
Press “ID Set” for 3 seconds, and press “9” then “9”
within 2 seconds.
To have the IR remote return to default state where all projectors
can be controlled, press “ID Set” for “3” seconds, and press “0“
twice within 2 seconds.