Ricoh PJ K360, Руководство пользователя

Страница: 42 / 58

40
English
User Controls
On
Displays the lamp warning
message.
Off
The warning lamp message will not
be displayed.
Attention
If [Lamp Life Reminder] is set to [Off], the lamp warn -
y
ing message will not be displayed when the lamp
used time reaches the end of lamp life. In this case,
please check the lamp life with the values at the
[Lamp Hours Used (Normal)] and [Lamp Hours Used
(ECO)].
Lamp Power Mode
„
Selects desired lamp power mode under different
y
situations.
Press ▲▼ to select [Lamp Power Mode]. 1)
Press ►, < 2) Input/Enter > or < Enter > to display
the setting dialog box.
Press ◄► to select the desired item. 3)
Normal Normal brightness.
Auto
The brightness level of the content
is automatically detected to
significantlyreduced lamp power
consumption during periods of
inactivity.
ECO1
Lower brightness reduces the lamp
power consumption and extends
the lamp life.
ECO2
Lowest brightness reduces the
lamp power consumption and
extends the lamp life.
Note
When there is no signal for more than 5 minutes, the
y
lamp power will be decreased automatically for power
saving.
Clear Lamp Hours
„
Reset the lamp usage time after replacing the
y
lamp unit.
Press ▲▼ to select [Clear Lamp Hours]. 1)
Press ►, < 2) Input/Enter > or < Enter > to display
the setting dialog box.
Press ▲▼ to switch [Yes]/[No]. 3)
Press ►, < 4) Input/Enter > or < Enter > to ex -
ecute.
High Altitude
Set to [On] when the projector is used at elevation
between approx. 1 000 m (3 300 ft) and approx. 3 000
m (10 000 ft).
Press ▲▼ to select [High Altitude]. 1)
Press ►, < 2) Input/Enter > or < Enter > to display
the adjustment dialog box.
Press ◄► to switch [On]/[Off]. 3)
On
For the elevation between approx. 1
000 m (3 300 ft) and approx. 3 000
m (10 000 ft).
Off
For the elevation below approx. 1
000 m (3 300 ft).
Note
When [On] is selected, the speed and the noise of the
y
fan will increase. Do not use this projector in place
elevation is over 3000m (10000ft).
Dust Filter Reminder
Set the cleaning cycle of the filters and reset the use
time of the filters.
Press ▲▼ to select [Dust Filter Reminder]. 1)
Press ►, < 2) Input/Enter > or < Enter > to display
the setting dialog box.
Filters Remind (Hour)
„
Set the interval timer to display the Dust Filter
y
Reminder message.
Press ▲▼ to select [Filters Remind]. 1)
Press ►, < 2)
Input/Enter
> or <
Enter
> to display
the adjustment dialog box.
Press ◄► to set the time. 3)
When set to 0 (Hour), this function is disabled.
y
The factory default is 0 hour.
y
You can set the time in between 50 hours and
y
1000 hours.
Cleaning up Reminder
„
Reset the air filter used time to zero.
y
Reset the air filter hour counter after cleaning or
y
replacing the dust filter.
Press ▲▼ to select [Cleaning up Remind - 1)
er].
Press ►, < 2) Input/Enter > or < Enter > to display
the setting dialog box.
Press ▲▼ to switch [Yes]/[No]. 3)
Press ►, < 4)
Input/Enter
> or <
Enter
> to ex -
ecute.
Note