38
English
User Controls
Audio
Select [Audio] from the Main Menu (see “How to
operate menu” on page 29) and then select the
item from the Sub Menu.
Note
“AUDIO” menu is not available on RICOH PJ RX300.
y
Mute
Temporarily turn off the sound.
Press ▲▼ to select [Mute].
1)
Press ►, <
2)
Input/Enter
> or <
Enter
> to display
the setting dialog box.
Press ◄► to switch [On]/[Off].
3)
On
Mute.
Off
Output audio.
Volume
Adjust the volume.
Press ▲▼ to select [Volume].
1)
Press ►, <
2)
Input/Enter
> or <
Enter
> to display
the adjustment dialog box.
Press ◄► to adjust the volume.
3)
Operation
Adjustment
Adjustment range
Press ►.
Turn up the
volume
Maximum value 32
Press ◄.
Turn down the
volume
Minimum value 0
You can also press the <
y
V
olume
+/-> buttons on
the remote control.
In Standby Mode (Audio)
This function is used to switch the output audio signal
from the <Audio Out> terminal On/Off at standby mode.
Press ▲▼ to select [In Standby Mode
1)
(Audio)].
Press ►, <
2)
Input/Enter
> or <
Enter
> to display
the adjustment dialog box.
Press ◄► to switch [On]/[Off].
3)
On
Output the audio signal from the
<Audio Out> terminal when in
Standby mode.
Off
Mute the audio signal from the
<Audio Out> terminal when in
Standby mode.
Note
When setting the [In Standby Mode (Audio)] function
y
to [On] and in Standby mode status, the connected
audio signal to <Audio 1 In> terminal can be output
from the <Audio Out> terminal. The audio signal
output level is fixed and cannot be adjusted.
