25
English
Contact your
sales represen-
tative for repair
service if the
projector displays
these symptoms.
Powering Off the Projector
1. Press the “ ” button on the remote control or
on the control panel to turn off the projector.
The following message will be displayed on the screen.
Press the “
” button again to confirm otherwise the
message will disappear after 10 seconds. When you press
the “
” button for the second time, the fan will start cool
-
ing the system and will shut down.
2. The cooling fans continue to operate for about 60 seconds
for cooling cycle and the Power indicator will Flash Amber.
When the Power indicator
lights solid Amber, the projector
has entered standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and
has entered standby mode. Once in standby mode, simply
press “ ” button to restart the projector.
3. Disconnect the power cord from the electrical outlet and
the projector.
Warning Indicator
When the warning indicators (see below) come on,
the projector will automatically shutdown:
“Lamp” LED indicator is lit red and “Power” indicator
flashes amber.
“Temp” LED indicator is lit red and “Power
” indicator flash
-
es amber. This indicates the projector has overheated.
Under normal conditions, the projector can be switched
back on.
“Temp” LED indicator flashes red and “Power” indicator
flashes amber.
Unplug the power cord from the projector, wait for 30 sec
-
onds and try again. If the warning indicator light up again,
please contact your dealer for assistance.
Basic Operations
