T
echnical
B
ulletin
PAGE: 5/5
Reissued: 13-Mar-03
Model:
Model K-P1
Date:
12-Apr-01
No.:
RG058001e
Firmware Updating Procedure
1. Prepare 2 IC cards with the controller firmware.
2. Turn off the main switch.
3. Remove the IC card slot cover on the rear side of the machine as shown.
4. Insert the IC card-1 and turn on the main switch.
“Onboard Sys. 1/2” is displayed.
5. Press “# Enter.”
Note:
Make sure that
∗
is displayed.
6. Scroll with the [
▲
] [
▼
] key and select “Update.”
Press “# Enter” to start downloading.
The “On Line” LED starts blinking and the machine starts to
download the program.
(Notice that the
∗
mark disappears as the program is
downloaded.)
7. When updating card-1 is finished, “Update 1/2 task done” is
displayed.
8. Turn off the main switch and replace the card with IC card-2.
Turn on the main switch, then downloading will automatically
start.
9. When updating card-2 is finished, “Update done” is displayed.
Then, turn off the main switch, remove the card, turn on the
main switch back and print the configuration sheet.
Check that controller firmware is successfully updated.
Onboard Sys. 1/2
Onboard Sys. 1/2
∗
Update
Updating
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
Update 1/2 task done
Updating
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
Update done
