T
echnical
B
ulletin
PAGE: 1/4
Reissued: 20-Jun-01
Model:
Model K-P1
Date:
09-Apr-01
No.:
RG058003a
RTB Correction
This page has been added to the original bulletin.
Subject:
Dirty Background on Printouts
Prepared by:
K. Misugi
From:
Technical Services Dept., GTS Division
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
The cartridge has been modified from June production so that dirty background will not
occur at installation even when the cartridge is tilted.
A green decal is added so the new cartridge can be distinguished from the old type.
The same decal is also placed on the supply cartridge, next to the bar-code label on the
box.
This RTB is to remind you of the remarks for cartridge installation.
•
Place the cartridge on a level surface when removing the sealing tapes on the
cartridge.
•
Remove the sealing tapes on the cartridge before turning on the main switch.
•
Once the seals have been removed, do not shake the cartridge.
Note:
This only applies to cartridge installation and replacement.
Please refer to the original RTB, which was previously issued for the dirty background
problem at installation.
1
2
3
4
Green decal on the new cartridge.
