Ricoh M116 Скачать руководство пользователя страница 21

Страница: 21 / 165

Installation Requirements

2-1

M116/M117

lat

2. INSTALLATION

2.1 INSTALLATION REQUIREMENTS

2.1.1 ENVIRONMENT



This machine, which uses high voltage power sources, can generate ozone gas. High

ozone density is harmful to human health. Therefore, the machine must be installed in a

well-ventilated room.

1. Temperature Rage: 10°C to 32°C (50°F to 89.6°F)

2. Humidity Range: 15% to 80% RH

3. Ambient Illumination: Less than 2,000 lux (do not expose to direct sunlight)

4. Ventilation: 3 times/hr/person

5. Do not put the machine in areas with sudden temperature changes. This includes:



Areas directly exposed to cool air from air conditioning



Areas directly exposed to heat from a heating system.

6. Do not put the machine in areas exposed to corrosive gas.

7. Do not install the machine at locations over 2,000 m (6,562 ft.) above sea level.

8. Put the machine on a strong, level base. (Tilting towards any side must be no more than 3

mm.)

9. Do not put the machine in areas with strong vibrations.

Содержание M116






































































































































































Результаты поиска

Содержание M116

Отзывы:

Похожие инструкции для M116

Бренды по названию

Популярные бренды

Ricoh M116, Руководство по обслуживанию

Результаты поиска

Содержание M116

Отзывы:

Похожие инструкции для M116

Бренды по названию

Популярные бренды