Ricoh M116 Скачать руководство пользователя страница 119

Страница: 119 / 165

Energy Saver Modes

7-1

M116/M117

erg

y S

aveR

7. ENERGY SAVER

7.1 ENERGY SAVER MODES

Customers should use energy saver modes properly, to save energy and protect the environment.

The backlight of the screen is turned off and "Energy Saver Mode1" appears on the screen, and

then the fusing lamp is turned off and "Energy Saver Mode2" appears on the screen.

The area shaded grey in this diagram represents the amount of energy that is saved when the

timers are at the default settings. If the timers are changed, then the energy saved will be different.

For example, if the timers are all set to 240 min., the grey area will disappear, and no energy is

saved before 240 min. expires.

7.1.1 TIMER SETTINGS

The user can set these timers with Menu (System > Energy Saver 1 or Energy Saver 2)



Energy Saver Mode 1 (30 sec.): This can be only turned on or off.



Energy Saver Mode 2 (1 to 240 min.): This can be turned on or off and timer setting is

adjustable (default: 1min.).

Содержание M116






































































































































































Результаты поиска

Содержание M116

Отзывы:

Похожие инструкции для M116

Бренды по названию

Популярные бренды

Ricoh M116, Руководство по обслуживанию

Результаты поиска

Содержание M116

Отзывы:

Похожие инструкции для M116

Бренды по названию

Популярные бренды