Ricoh M052, Руководство по обслуживанию

Страница: 511 / 661

Error Codes
SM 5 M381
Fax Op
tion
T
y
pe SP5200
(M38
1)
Code Meaning Suggested Cause/Action
0-07
No post-message
response from the other
end after a page was sent
ƒ
Check the line connection.
ƒ
Replace the FCU.
ƒ
The other end may have jammed or run out of
paper.
ƒ
The other end user may have disconnected
the call.
ƒ
Check for a bad line.
ƒ
The other end may be defective; try sending to
another machine.
0-08
The other end sent RTN or
PIN after receiving a page,
because there were too
many errors
ƒ
Check the line connection.
ƒ
Replace the FCU.
ƒ
The other end may have jammed, or run out of
paper or memory space.
ƒ
Try adjusting the tx level and/or cable
equalizer settings.
ƒ
The other end may have a defective
modem/FCU; try sending to another machine.
ƒ
Check for line problems and noise.
Cross reference
ƒ
Tx level - NCU Parameter 01 (PSTN)
ƒ
Cable equalizer - G3 Switch 07 (PSTN)
ƒ
Dedicated Tx parameters in Service Program
Mode
0-14
Non-standard post
message response code
received
ƒ
Incompatible or defective remote terminal; try
sending to another machine.
ƒ
Noisy line: resend.
ƒ
Try adjusting the tx level and/or cable
equalizer settings.
ƒ
Replace the FCU.
Cross reference
See error code 0-08.